Seed Drills
Cultivation

KRM 2512 Soladrill

The KRM 1706 Soladrill has been designed to become an integral part of your cultivation implement to give a compact one-pass seedbed preparation and sowing unit. Extra close coupling saves weight and reduces overhang allowing the use of a lighter tractor for reduced compaction.

KRM Elite Coulter
Elite tine coulters are mounted in three rows on equal length arms. Pressure is supplied by a heavy duty spring positioned at a shallow angle below the tine. This geometry ensures that for each movement of the tip the corresponding deflection of the spring is small resulting in more even pressure and therefore depth. This system works equally well when shallow drilling (rape) or deep drilling (peas) as well as in varying soil conditions.
 
   
Standard Features
 
The solatronic control box monitors all key areas of sowing including; forward speed, area sown, fan speed, hopper level and tramline management.  
When on a tramline bout the tramline valves save seed back to the tank, preventing over sowing and ensuring a clean start to each tramline. As standard two shutoffs are used per wheeling, three can be specified to accommodate large/flotation tyres.
Heavy duty, power harrow mounted markers leave an easily visible mark. The angle of the large diameter marker disc's can be adjusted to ensure a clear mark is left in difficult seed beds.
The central metering unit offers precise control of sowing rate from 2 to 400kg/ha and ensures even seed spacing. The seed is metered into a high speed air stream then distributed to the individual coulters. This unit offers easy calibration, simple setting and fast hopper emptying.
 
The offset metering unit makes application rate adjustment and calibration easy. Removing a thumb screw allows the venturi to drop away providing unimpeded access to collect the metered seed.
 
Three rows of elite tine coulters with a 40cm stagger and 12.5cm row spacing ensure even seed depth is maintained. Adjustment through a parallel linkage ensures pressure on all coulters is identical for constant depth.
Two rows of staggered following harrow tines leave a level seedbed. The maximum working depth of the tines can be adjusted as can tine pressure and angle.

3.5m 2512 Power Harrow Mounted

Pictured here on our 180hp Maxim Power Harrow this 2512 drill has been specified to include PE markers. Close coupling of the drill to the harrow keeps weight close to the tractor for reduced lift requirement.

   

4m 2512 Power Harrow Mounted

Pictured here on our 250hp Magnum Power Harrow. Close coupling of the drill to the harrow keeps weight close to the tractor for reduced lift requirement.

 

Fitting Kits Available

Following years of experience mounting our drills on to various power harrows, we are able to supply fitting kits for most power harrows and some cultivators. Please contact us for more information.

Kuhn Lemkin Maschio Sumo Optitilth
 

 

Keith Rennie Machinery Ltd, Registered office: Clay Pit Lane, Bar Lane Industrial Estate, Boroughbridge, North Yorkshire,YO51 9LS
Tel: 01423 324221
 
Registered in England No 2050946 Vat No GB 431025309, e-mail info@krm-ltd.co.uk
Fax: 01423 324355