Where smaller areas are to be sown or low seed rates applied, a convenient 300 litre, pressurised hopper is available.

Opt for a larger 2000 litre, pressurised hopper for higher daily work rates and sowing higher seed rates. The hopper cover opens fully to allow all filling methods from big bags to bulk.

The 2000 Litre hopper can also be split to accommodate two products. This could be for seed and fertiliser or to apply two seeds simultaneously such as grass and clover. Three ratios can be selected: 70:30, 60:40 and 50:50.

If you wish to add to the 2000 Litre capacity, or have the ability to apply a third product - why not add a Mini Seed? You can find more details by clicking on the following link:https://krm-ltd.co.uk/product/sola-miniseed/.

An existing ISObus control box will accommodate up to 3 metering units - for example, a split hopper for seed and fertiliser and the additional Mini Seed. The additional product can be applied through spreader plates behind the roller.

The 2000 Litre hopper can be supplied with two independently driven metering units, this allows either half width shut off to be achieved or two separate products to be metred.

Utilise the tractor's existing terminal or third party ISObus display for operation of the GS300. Through ISObus, three metering units can be controlled, for example, seed and fertiliser in the main 2000 Litre hopper and an additional product in an additional Mini-Seed hopper. As long as the terminal is 'unlocked', ISObus offers variable rate, auto on / off and guidance.

The Performa control box is compatible with the 300 Litre hopper and also the 2000 Litre hopper when only one product is being used. This intuitive, simple to use interface provides the operator with key information about settings, simple calibration and has an in-work mode.

This innovative weight transfer system uses the mass of the tractor to add weight to the GS and can provide up to 650kg of additional weight (at 75 bar). Having sufficient pressure is essential to ensure a uniform seeding depth in tough conditions and using weight transfer avoids having to add extra weight to the machine.